Toshiba MEA210 Owner's Manual page 17

Digital audio player
Table of Contents

Advertisement

To disconnect the interface cable from the player, pull out the cable while
simultaneously pressing the "PUSH" mark on the connector.
Caution
• Be sure to use the supplied interface cable when connecting to a computer.
Substitution by other means may result in damage or malfunction.
• The player consumes power of 500mA/5V while connected to a computer. Confirm
that a USB connector of your computer (or USB hub) satisfies this requirement before
connecting the player.
• Make sure that battery is loaded before connecting to a computer. The player cannot
turn on if it is connected to a computer with no battery loaded. When the player is
connected to your computer, it is powered from the USB connector (or USB hub).
• Never remove the interface cable while exchanging data between the player and the
computer. Doing so may damage the data.
• Close the interface door when the I/F connector is not used.
• Do not use the supplied interface cable to connect to any device other than this player.
Notes
• You cannot operate the player when connected to a computer. The player will stop
playback when connected to a computer.
• The display of the player may be darker when connected to a computer. It is not
abnormal.
17

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents