Installing Cables - National Instruments 653 Series User Manual

Installing Cables

1
1 PC Chassis with NI High-Speed DIO Device
2 Cable Assembly
Caution Before connecting the cable, disconnect power from the NI device and any other
connected hardware to prevent damage to the hardware and personal injury. NI is not liable
for damage resulting from improper connections.
Caution Before attaching any cables or accessories, install the NI high-speed DIO device.
Refer to the Getting Started Guide that shipped with your device for instructions on
installing the device.
NI 653X Cable Adapter User Guide
An SHC68-C68-D2 or C68-C68-D4 cable connects the NI 653x cable
adapter to the NI high-speed DIO device. Figure 2 shows how to install the
cable.
DIGITAL DATA & CONTROL
Figure 2. Connecting a SHC68-C68-D2 or C68-C68-D4 Cable
Refer to Figure 2 as you complete the following steps to install the cable
adapter:
1. Insert the cable into the cable adapter.
2. Tighten the cable jackscrews.
2
3 Cable Jackscrews
4 NI 653x Cable Adapter
to the NI 653x Cable Adapter
4
3
4
ni.com