User's Manual
Printer error
Pointing device
If you are using a PS/2 or serial mouse, also refer to Chapter 8, Optional Devices,
and to your mouse documentation.
AccuPoint II
Problem
On-screen pointer
does not respond to
AccuPoint II operation
PS/2 mouse
Problem
On-screen pointer
does not respond to
PS/2 mouse operation keyboard port.
9-16
Make sure your software is configured to recog-
nize the printer. Check your printer and software
documentation.
Check your printer documentation.
If problems persist, contact your dealer.
Procedure
If a PS/2 or serial mouse is connected, check
the HW Setup window. The Pointing Device
option should be set to Simultaneous to use
both the AccuPoint II and an external PS/2
mouse.
If problems persist, contact your dealer.
Procedure
Check that the PS/2 mouse cable's 6-pin
connector is firmly connected to the PS/2 mouse/
You may have connected the mouse after
turning the computer on. Turn off the computer,
make sure the mouse is firmly connected and
turn the computer back on.