Pressure Switch; Pressure Transducer - Graco Compact Dyna-Star 3A6941B Instructions Manual

Pressure Switch

The pressure switch (T) is factory set to 3000 psi (20.7
MPa, 207 bar) (F . 22).
IG
F . 22
IG
When the pressure in the system reaches 3000 psi, the
pressure switch (T) closes.
Output type: 1 Switching output NO
Operating voltage: 24VDC
Current: 5A
Connection type: Packard Metri-Pack 150 Series
Preset pressure: 3000 psi
3A6941B

Pressure Transducer

The pressure transducer (T) is used for continuous
pressure monitoring.
Output type: Analog 1- 5V
Operating voltage: 8 - 32V
Connection type: Packard Metri-Pack 150 Series
Pressure range: 0-5000 psi
F . 23
IG
Operation
23