Toshiba Satellite A110 Series Resource Manual page 34

34
Setting up your computer and getting started
12 Firmly press the memory module into the memory slot's
socket at approximately a 30-degree angle (to the
horizontal surface of the computer).
(Sample Illustration) Inserting the module in the socket
13 Once the module's connector is fully inserted into the
socket, press downward on the top edge of the module to
seat the module into the latches at the sides of the socket.
These latches should "snap" into place securely with the
corresponding cutouts in the side of the module. If the
latches and cutouts do not line up correctly, repeat step 12
above, then repeat this step.
latch
(Sample Illustration) Pressing down on the memory module
latch