Correcting keystone
Keystoning refers to the situation where the projected image is noticeably wider at either the top or bottom. It occurs when the projector is not
perpendicular to the screen.
To adjust the Keystone:
1. Press the down arrow key
2. Select Settings and press OK.
3. Select Keystone and press OK.
4. Disable the Auto Keystone setting.
5. Select Keystone adjustment and press OK.
•
To correct keystoning at the top of the image, use
•
To correct keystoning at the bottom of the image, use
•
To return to default keystone settings press
You may only make these adjustments if Auto Keystone is disabled in the Installation menu. See
6. When you are done adjusting the keystone, press
go back to the home screen directly.
on the remote control three times to navigate to the settings menus.
on your remote control.
on your remote control
to save your changes and return to the previous menu, or press
on your remote control.
Keystone on page 94
41
for details.
to save your changes and