Technical Specifications - Dimplex HD 501 AK Installation And Operating Instructions Manual

Hide thumbs

Table Of Contents

Table of Contents

Available languages

Installation and Operating Instructions

Hand Dryer HD 501 AK, HD 601 AM

These installation and operating instructions should be read carefully and retained for future

reference.

Ensure that these installation and operating instructions are passed on to any new owner.

Description of Hand Dryer

The sole purpose of the hand dryer is to dry hands. The hands are dried in a stream of warm air

that flows out of the air outlet grille. The hands can be rubbed together to accelerate drying.

The hand dryer is operated by a proximity switch which starts the unit automatically when hands

are placed under the air outlet grille. When the hands are removed from the airflow, the proximity

switch automatically stops the dryer after a run-on delay of approximately 2 seconds.

The hand dryer is designed to be mounted indoors only.

It must be mounted on a vertical wall with the air outlet opening pointing downwards. The

appliance should only be connected to the fixed wiring of the premises.

The installation and electrical connection of the hand dryer may only be performed by a

competent electrician!

All safety measures taken must conform to the applicable national regulations effective in the

relevant country! The electrical supply circuit to the dryer must incorporate an isolating switch

with at least 3mm contact clearance on each pole!