Pointing Device; Touch Pad - Toshiba NB500 Series User Manual

Memory Media Card
For further information, please refer to Chapter 3, Operating Basics.
Problem
Memory media card
error occurs
You cannot write to a
memory media card
You cannot read a file Check to ensure the required file is actually on the

Pointing device

If you are using a USB mouse, you should also refer to both the
device
mouse.

Touch Pad

Problem
The Touch Pad does
not work.
On-screen pointer
does not respond to
pointing device
operation
Double-tapping
(Touch Pad) does not
work
User's Manual
Procedure
Remove the memory media card from the computer
and then reinsert it in order to ensure it is firmly
connected.
If the problem persists, then you should refer to the
documentation supplied with your memory media
card for further information.
Remove the memory media card from the computer
and check to ensure that it is not write protected.
memory media card that is inserted into the
computer.
If you are still unable to resolve the problem,
contact your reseller, dealer or service provider.
section in this chapter, and the documentation supplied with your
Procedure
Check the Device Select settings.
Click Start -> Control Panel -> Hardware and
Sound -> Mouse.
Pressing FN + F9 to enables.
In this instance the system might be busy - Try
moving the mouse again after waiting a short while.
In this instance, you should initially try changing the
double-click speed setting within the Mouse Control
utility.
1. To access this utility, click Start -> Control
2. Within the Mouse Properties window, click the
3. Set the double-click speed as required and click
NB500/NB505/NB520/NB525/NB550D/NB555D Series
Panel -> Hardware and Sound -> Mouse.
Buttons tab.
OK.
USB
6-9