Fisher & Paykel HC90PCTX1 Installation Manual page 8

ATTACH BRACKETS AND MOUNTING SCREWS
1
2
3
2mm
8
Temporarily mark the height of the
bottom of the rangehood and the
centre of the cooktop on the wall
according to the information provided
in 'Installation Height'.
Attach the chimney bracket and upper
chimney bracket (if using the upper
chimney). Use the 30mm screws
and expansion plugs if attaching
to masonry.
Attach the upper hood mounting
screws. Use the 30mm screws
and expansion plugs if attaching
to masonry.
Ensure that there is a 2mm gap
between the screw head and the wall.
HANG RANGEHOOD
1
2
3
Hang the rangehood off the upper
rangehood mounting screws. Hang off
the keyhole attachment points on the
back of the rangehood then tighten
the screws.
Attach the lower rangehood
mounting screws to fix the rangehood
to the wall.
Refit the filters.
Attach ducting to the ducting adapter
using aluminium duct tape.