Table of Contents
Advertisement
Once the
menu is selected, enter the RC* code written under the base and press
to confirm.
Warning : If you wish to associate a non-Philips handset to the DECT 214 base station, make sure
that these handsets are GAP compliant otherwise they will not operate properly.
✦ To unregister the handset you use
To unregister all the handsets (except the handset you are using)
✦
Warning : Once unregistered, the handset is no longer operational.
Technical settings (country dependent)
If your network operator is not the main national network operator, you may have to change the line
settings. Some of the following settings are available subject to a subscription with your operator and
also technical availability.
The options on this menu are country dependent and some may not exist in certain
countries.
T o enter the following settings :
Press
to exit the programming option.
✦ Changing Caller Identification type
The Caller Identification service (Name and Number) is available subject to a subscription to your operator
(according to availability). (Country dependent)
or
to choose the right setting among the list
✦ Changing the dial mode
This allows you to select either DTMF tone dialling (faster dialling, access to operator services) or pulse
dialling (also called "Loop disconnect" and used in countries without DTMF capability).The default value is
TONE. (Country dependent, you may not be able to change to "Pulse").
or
to choose TONE or PULSE
✦ Changing recall type (flash setting)
The use of some services accessed with
depend on the flash setting (Short/Long) according to your installation type (Public,
PABX). (country dependent)
or
to choose between Short or Long
enter the RC code*
enter the RC code*
or
To scroll through the menus
(call waiting, call forward...) will
*RC code
(Registration
Code) is
written under
the base.
: Short.
: Long.
www.philips.com/faqs/dect
11
Advertisement
Table of Contents
