Safety National Conventions The following subsections describe notational conventions used in this document. Notes, Cautions, and Warnings Throughout this guide, blocks of text may be accompanied by an icon and printed in bold type or in italic type. These blocks are notes, cautions, and warnings, and they are used as follows: NOTE: A NOTE indicates important information that helps you make better use of your computer system.
The wall socket shall be installed near the equipment and shall be easily accessible. For use only with the attached power adapter Manufacturer: L&T Display Technology(Fujian) Ltd Model: STK025-19131T (24T1Q, 27T1Q) Manufacturer: TPV Electronics (Fujian) Co., Ltd. Model: ADPC1945 (Q27T1)
Installation Do not place the monitor on an unstable cart, stand, tripod, bracket, or table. If the monitor falls, it can injure a person and cause serious damage to this product. Use only a cart, stand, tripod, bracket, or table recommended by the manufacturer or sold with this product.
Cleaning Clean the cabinet regularly with cloth. You can use soft-detergent to wipe out the stain, instead of strong-detergent which will cauterize the product cabinet. When cleaning, make sure no detergent is leaked into the product. The cleaning cloth should not be too rough as it will scratch the screen surface.
Other If the product is emitting a strange smell, sound or smoke, disconnect the power plug IMMEDIATELY and contact a Service Center. Make sure that the ventilating openings are not blocked by a table or curtain. Do not engage the LCD monitor in severe vibration or high impact conditions during operation. Do not knock or drop the monitor during operation or transportation.
Contents in Box CD Manual Warranty card Power Cable Adapter HDMI Cable DP Cable Not all signal cables (DP, HDMI cables) will be provided for all countries and regions. Please check with the local dealer or AOC branch office for confirmation.
Adjusting Viewing Angle For optimal viewing it is recommended to look at the full face of the monitor, then adjust the monitor’s angle to your own preference. Hold the stand so you will not topple the monitor when you change the monitor’s angle. You are able to adjust the monitor as below: NOTE: Do not touch the LCD screen when you change the angle.
Connecting the Monitor Cable Connections In Back of Monitor and Computer: Q27T1 DCIN HDMI-2 HDMI-1 24T1Q/27T1Q DCIN HDMI 1. Power 2. Earphone 3. DisplayPort 4. HDMI Connect to PC 1. Connect the power cord to the back of the display firmly.
Adaptive-Sync function 1. Adaptive-Sync function is working with DP/HDMI 2. Compatible Graphics Card: Recommend list is as the below, also could be checked by visiting www.AMD.com • Radeon™ RX Vega series • Radeon™ RX 500 series • Radeon™ RX 400 series •...
Adjusting Hotkeys Source/Exit Clear Vision/Left Volume/Right Menu/Enter Power Menu/Enter Press to display the OSD or confirm the selection. Power Press the Power button to turn on the monitor. Volume/Right When there is no OSD, Press Volume button to active volume adjustment bar, Press Left or Right to adjust volume. Source/Exit When the OSD is closed, press Source/Exit button will be Source hot key function.
Page 13
Clear Vision 1. When there is no OSD, Press the “Left” button to activate Clear Vision. 2. Use the “Left” or “Right” buttons to select between weak, medium, strong, or off settings. Default setting is always “off”. 3. Press and hold “Left” button for 5 seconds to activate the Clear Vision Demo, and a message of “Clear Vision Demo: on”...
OSD Setting Basic and simple instruction on the control keys. Luminance Color Setup Picture Boost OSD Setup Extra Exit Contrast Gamma Gamma 1 Brightness Overdrive Eco mode Standard 1). Press the MENU-button to activate the OSD window. Left or Right to navigate through the functions. Once the desired function is highlighted, press the 2).
Luminance Luminance Color Setup Picture Boost OSD Setup Extra Exit Contrast Gamma Gamma 1 Brightness Eco mode Standard Overdrive Contrast 0-100 Contrast from Digital-register. Brightness 0-100 Backlight Adjustment Standard Standard Mode Text Text Mode Internet Internet Mode Eco mode Game Game Mode Movie Movie Mode...
Color Setup Color Setup Picture Boost OSD Setup Extra Exit Luminance Color Temp. Warm LowBlue Mode DCB Mode Green DCB Demo Blue Warm Recall Warm Color Temperature from EEPROM. Normal Recall Normal Color Temperature from EEPROM. Color Temp. Cool Recall Cool Color Temperature from EEPROM. sRGB Recall SRGB Color Temperature from EEPROM.
Picture Boost OSD Setup Extra Exit Luminance Picture Boost Color Setup Bright Frame Brightness H. Position Frame Size Contrast V. Position Bright Frame on or off Disable or Enable Bright Frame Frame Size 14-100 Adjust Frame Size Brightness 0-100 Adjust Frame Brightness Contrast 0-100 Adjust Frame Contrast...
OSD Setup Extra Exit OSD Setup Luminance Color Setup Picture Boost Language English H. Position Transparence V. Position Timeout Break Reminder DP Capability Adaptive-Sync Language Select the OSD language Timeout 5-120 Adjust the OSD Timeout Please be noted that only DP1.2 support Adaptive-Sync DP Capability 1.1/1.2 function...
Auto Config. Yes or No Auto adjust the picture to default Off timer 0-24hrs Select DC off time 24T1Q/27T1Q: Wide/4:3 Image Ratio Select image ratio for display. Q27T1: Wide / 4:3 / 1:1 / Movie1 / Movie2 DDC/CI Yes or No...
(Screen+) Welcome to “i-Menu” software by AOC. i-Menu makes it easy to adjust your monitor display setting by using on screen menus instead of the OSD button on the monitor. To complete installation, please follow the installation guide. The software Supported operating systems: Windows 10, Windows 8, Windows 7.
Welcome to use AOC e-Saver monitor power management software! The AOC e-Saver features Smart Shutdown functions for your monitors, allows your monitor to timely shutdown when PC unit is at any status (On, Off, Sleep or Screen Saver); the actual shutdown time depends on your preferences (see example below).
Adjust the maximum resolution and frequency that the monitor can handle properly. Make sure the AOC Monitor Drivers are installed. Adjust the Contrast and Brightness Controls. Press to auto adjust. Picture Is Fuzzy & Has Make sure you are not using an extension cable or switch box.
Specification General Specification Model name 24T1Q Driving system TFT Color LCD Viewable Image Size 60.47 cm diagonal Panel Pixel pitch 0.2745mm(H) x 0.2745mm(V) Video HDMI lnterface & DP Interface Display Color 16.7M Colors Horizontal scan range 30k-85kHz Horizontal scan Size(Maximum) 527.04mm...
Page 26
Model name 27T1Q Driving system TFT Color LCD Viewable Image Size 68.6 cm diagonal Panel Pixel pitch 0.3114mm(H) x 0.3114mm(V) Video HDMI lnterface & DP Interface Display Color 16.7M Colors Horizontal scan range 30k-85kHz Horizontal scan Size(Maximum) 597.888mm Vertical scan range 48-75Hz Vertical Scan Size(Maximum) 336.312mm...
Page 27
Model name Q27T1 Driving system TFT Color LCD Viewable Image Size 68.47 cm diagonal Panel Pixel pitch 0.2331mm(H) x 0.2331mm(V) Video HDMI lnterface & DP Interface Display Color 16.7M Colors Horizontal scan range 30k-114kHz Horizontal scan Size(Maximum) 596.74mm Vertical scan range 48-75Hz Vertical Scan Size(Maximum) 335.66mm...
Pin Assignments Pin No. Signal Name Pin No. Signal Name Pin No. Signal Name TMDS Data 2+ TMDS Data 0- DDC/CEC Ground TMDS Data 2 Shield TMDS Clock + +5V Power TMDS Data 2- TMDS Clock Shield Hot Plug Detect TMDS Data 1+ TMDS Clock- TMDS Data 1Shield...
Plug and Play Plug & Play DDC2B Feature This monitor is equipped with VESA DDC2B capabilities according to the VESA DDC STANDARD. It allows the monitor to inform the host system of its identity and, depending on the level of DDC used, communicate additional information about its display capabilities.