Land Pride WC1503 Operator's Manual
  1. Manuals
  2. Brands
  3. Land Pride Manuals
  4. Chipper
  5. WC1503
  6. Operator's manual

Land Pride WC1503 Operator's Manual

Wood chipper
Hide thumbs Also See for WC1503:
Table of Contents

Advertisement

Quick Links

Download this manual
Wood Chipper
WC1503
35193
Table of Contents
!
Read the Operator's Manual entirely. When you see this symbol,
the subsequent instructions and warnings are serious - follow
without exception. Your life and the lives of others depend on it!
Cover photo may show optional equipment not supplied
with standard unit.
For an Operator's Manual and Decal Kit in French
Language, please see your Land Pride dealer.
328-085M
Operator's Manual
Printed 11/22/19

Advertisement

Table of Contents
loading

Related Manuals for Land Pride WC1503

Summary of Contents for Land Pride WC1503

  • Page 1 Your life and the lives of others depend on it! Cover photo may show optional equipment not supplied with standard unit. For an Operator’s Manual and Decal Kit in French Language, please see your Land Pride dealer. Printed 11/22/19...

  • Page 2: Machine Identification

    Model Number Serial Number Machine Height Machine Length Machine Width Machine Weight Delivery Date First Operation Accessories Dealer Contact Information Name: Street: City/State: Telephone: Email: California Proposition 65 WARNING: Cancer and reproductive harm - www.P65Warnings.ca.gov WC1503 Wood Chipper 328-085M 11/15/19...
  • Page 3 Land Pride assumes no responsibility for errors or omissions. Neither is any liability assumed for damages resulting from the use of the information contained herein. Land Pride reserves the right to revise and improve its products as it sees fit. This publication describes the state of this product at the time of its publication, and may not reflect the product in the future.
  • Page 4 Land Pride products. Download the appropriate App on your Refer to Parts Manual QR smart phone, open the App, point your Locator on this page for phone on the QR code and take a picture. detailed instructions. WC1503 Wood Chipper 328-085M 11/15/19...

  • Page 5: Important Safety Information

     Important Safety Information Important Safety Information These are common practices that may or may not be applicable to the products described in this manual. Safety at All Times Look For The Safety Alert Symbol Careful operation is you best The SAFETY ALERT SYMBOL indicates there is a insurance against an accident.

  • Page 6: Transport Safely

     Replace parts on this implement  When inflating tires, use a clip-on the job that are in good condition. with genuine Land Pride parts only. chuck and extension hose long Do not alter this implement in a way  Lower implement to the ground and...

  • Page 7: Protective Equipment

    Use Safety Use Seat Belt and ROPS Keep Riders Off Lights and Devices Machinery  Land Pride recommends the use of a CAB or roll-over-protective-  Slow moving tractors, and tractor  Never carry riders or use structures (ROPS) and seat belt self-propelled equipment can to lift or transport individuals.
  • Page 8 Important Safety Information These are common practices that may or may not be applicable to the products described in this manual. Avoid crystalline Silica  Be aware of and follow OSHA  If possible, change into disposable (or other local, State, or Federal) or washable work clothes at the (quartz) Dust guidelines for exposure to airborne...
  • Page 9 Important Safety Information This page left blank intentionally. 11/15/19...

  • Page 10: Safety Labels

    Spray soapy water onto the cleaned area. all damaged or missing labels. Order new labels from your Peel backing from label and press label firmly onto the nearest Land Pride dealer. To find your nearest dealer, surface. visit our dealer locator at www.landpride.com.
  • Page 11 Table of Contents Important Safety Information 35193 35249 818-132C Danger: Thrown object hazard (2 places) 35193 848-840C Danger: Rotating blades 11/15/19 WC1503 Wood Chipper 328-085M...
  • Page 12 Important Safety Information 35193 35249 848-840C Danger: Rotating parts with knives (2 places) Location: Both sides of the feed chute 35193 35249 858-190C Warning: Flying Objects Hazard (2 places) Location: Both sides of the feed chute WC1503 Wood Chipper 328-085M 11/15/19...
  • Page 13 MOVING PARTS HAZARD To prevent serious injury or death from moving parts: Do not operate with guard missing Close & secure drive guard before starting 818-205C Rev. B 818-205C Warning: Moving parts hazard (2 places) 11/15/19 WC1503 Wood Chipper 328-085M...
  • Page 14 Do not operate with guard missing Close & secure drive guard before starting 818-205C Rev. B 818-205C Warning: Moving parts hazard 35249 838-111C Danger: Keep away, moving parts hazard 35468 818-543C Danger: Guard missing WC1503 Wood Chipper 328-085M 11/15/19...
  • Page 15 Table of Contents Important Safety Information 35469 35286 848-088C Danger: Guard missing hazard (3 Places) 35193 858-095C 2" x 4 1/2" Red reflector (2 places) 11/15/19 WC1503 Wood Chipper 328-085M...
  • Page 16 Table of Contents Important Safety Information 35294 818-552C Danger: Rotating driveline 35294 818-540C Danger: Guard missing WC1503 Wood Chipper 328-085M 11/15/19...
  • Page 17 Table of Contents Important Safety Information This page left blank intentionally. 11/15/19 WC1503 Wood Chipper 328-085M...

  • Page 18: Using This Manual

    Always provide model number and serial number when ordering parts and in all The WC1503 model is adapted for 3-Point Cat. l hitch on correspondences with your Land Pride dealer. For 12-30 hp (minimum 25 PTO hp for maximum capacity) location of your serial number plate, see Figure 1.

  • Page 19: Tractor Requirements

    (#8) with the four removed 1/4”-20 x 3/4" GR5 cap screws (#9) and hex locknuts (#11). Draw all eight hex locknuts (#11) up snug and then back each one off 1/2 turn. 11/15/19 WC1503 Wood Chipper 328-085M...
  • Page 20 Verify 1 13/16" is maintained from face of nut (#6) to 35253 center of hitch pin hole and then tighten hex nut (#4) to the correct torque. Driveline Assembly Figure 1-3 8. Repeat steps 1-7 for the left-hand hitch pin. WC1503 Wood Chipper 328-085M 11/15/19...

  • Page 21: Driveline Installation

    5. Rotate drive shaft shield (#1) down and secure with Use steps, grab-handles and anti-slip surfaces when bolts (#2) and locknuts (#3). Draw locknuts up snug. stepping on and off the tractor. 11/15/19 WC1503 Wood Chipper 328-085M...

  • Page 22: Tractor Hook-Up

    Quick Hitch hooks and upper bushing (#1) in upper center Quick Hitch hook. NOTE: Land Pride’s Quick Hitch can be attached to 4. Release Quick Hitch locking handles to secure Quick the tractor to provide quick and easy 3-point hook- Hitch to hitch pins (#4).

  • Page 23: Driveline Hook-Up

    Quick Hitch is used. IMPORTANT: Skid extensions can be adjusted to make driveline work with various PTO heights and not interfere with chipper upper frame or Quick Hitch. 11/15/19 WC1503 Wood Chipper 328-085M...

  • Page 24: Check Driveline Collapsible Length

    6. Hold inner and outer drivelines parallel to each other. If dimension “A” is greater than or equal to 1", then skip to “Check Driveline Maximum Length” on page 21. Otherwise continue with step 7. WC1503 Wood Chipper 328-085M 11/15/19...

  • Page 25: Check Driveline Maximum Length

    Start tractor, raise implement slightly, and drive forward enough to clear the support blocks. 8. Lower implement to ground and shut tractor down using “Tractor Shutdown Procedure”. 11/15/19 WC1503 Wood Chipper 328-085M...

  • Page 26: Start-Up Checklist

    A person’s body and/or clothing can become • Do not exceed this machine’s ability to do the job or to do entangled in the driveline. the job safely. If machine limits are in question, don’t do the job. WC1503 Wood Chipper 328-085M 11/15/19...

  • Page 27: Section 2: Operating Instructions

    • bracket (#1) on the implement. If needed, a sign can Protective clothing to protect against cuts, bruises, and be purchased from your nearest Land Pride dealer. pokes from tree limbs. Refer to “Slow Moving Vehicle Sign (Accessory)” •...
  • Page 28 Do not force Refer to Figure 2-2: feed product into the chipper. Land Pride offers the slow moving vehicle sign (#1) as an 11. Once Wood Chipper starts to self-feed, release accessory should your tractor not be equipped with a product and allow knives to pull product in at its own removable sign that fits Land Pride’s SMV mounting...
  • Page 29 Land Pride WC1503 Wood Chipper. See “Long Term Storage” on page 34 when storing unit for long periods or at the end of the season.
  • Page 30 Push down on rotation chute lock lever (#2) and hold. 2. Rotate discharge chute (#1) in small increments until desired angle of discharge is achieved. 3. Release rotation chute lock lever (#2). Make sure lever has locked into position and chute cannot rotate. WC1503 Wood Chipper 328-085M 11/15/19...

  • Page 31: Section 3: Adjustments

    Refer to Figure 3-4 Figure 3-5 9. Replace belt guard (#6) with existing 5/16"-18 x 3/4" GR5 hex flange screws (#7). Tighten hex flange screws to the correct torque. 10. Reconnect driveline to tractor power take-off shaft. 11/15/19 WC1503 Wood Chipper 328-085M...
  • Page 32 Tighten hex flange screws to the correct torque. See “Feed Chute” on page 16 for detailed installation instructions of feed chute. Connect driveline to the tractor power take-off shaft. Feed Chute Removal & Assembly Figure 3-7 WC1503 Wood Chipper 328-085M 11/15/19...
  • Page 33 (#3) in step 4 below. 4. Tighten GR8 Ledger bolts (#3) to 35-40 ft-lbs. See “Additional Torque Values” on page 40 for more information. 5. Continue with step 4.c. under “Check Knife Ledger Clearance” on page 28. 11/15/19 WC1503 Wood Chipper 328-085M...

  • Page 34: General Maintenance Information

    • Do not operate Wood Chipper with an out-of-balance rotor, threads and replace with Land Pride parts if needed. damaged or worn knives. Internal parts can work loose or break at high speeds. Always replace all blades at the same time.
  • Page 35 Flip knives over so that the sharp edges are leading in rotation and reattach them with existing 3/8"-24 x 5/8" GR8 bolts (#5). See step 6 below for special torque instructions. Land Pride Rotor Knife & Bolt Part Nos. Resharpen Knives Part No. Part Description Refer to Figure 4-2: 820-472C KNIFE REVERSIBLE - 17.5 ROTOR...

  • Page 36: Shear Bolt Protection

    See your 5. Remove belt from the smaller pulley (#8) first and Land Pride dealer when replacing shear bolts. then from the larger pulley (#9). Land Pride Shear Bolt Part No.
  • Page 37 Pull all material out of feed chute. Make sure instructions of feed chute. nothing is jammed between inlet opening and 5. Reattach driveline to tractor power take-off shaft. rotor at bottom of feed chute. 35263 Access Rotor Knives Figure 4-6 11/15/19 WC1503 Wood Chipper 328-085M...

  • Page 38: Long Term Storage

    Adjust and tighten loose parts or replace as needed. 8. Repaint parts where paint is worn or scratched to prevent rust. Ask your Land Pride dealer for aerosol touch-up paint. They are also available in touch-up bottles with brush, quarts, and gallon sizes by adding TU, QT, or GL to the end of the aerosol part number.

  • Page 39: Lubrication Points

    Hours Front Flange Bearings Zerks: Two Type of Lubrication: Multi-purpose Grease Quantity = As required 35264 Hours Rear Flange Bearings Zerks: Two Type of Lubrication: Multi-purpose Grease Quantity = As required 35308 11/15/19 WC1503 Wood Chipper 328-085M...

  • Page 40: Driveline U-Joints

    Zerks: One on shear bolt end of driveline Type of lubrication: Multi-purpose grease 35299 Quantity = As required Hours Driveline Outer Shaft Profile Where: Inside surfaces of outer shaft profile Type of lubrication: Multi-purpose Grease 35300 Quantity = As required WC1503 Wood Chipper 328-085M 11/15/19...

  • Page 41: Section 5: Specifications & Capacities

    270 degrees Feed Height Above Ground 35" (Without adjustable skids) Feed Height Adjustment 6 Settings (Includes without adjustable skids) Color Orange, Green & Beige 60" 9 5/8" MIN. 13 5/8" MAX. 51 1/2" 51 1/4" 35198 11/15/19 WC1503 Wood Chipper 328-085M...

  • Page 42: Section 6: Features & Benefits

    Product is pulled in by the sharp cutting knives with each pass of a knife. Operator can be Self-Feeding System retrieving the next object to load while the unit is chipping the last limb loaded into the feed chute. WC1503 Wood Chipper 328-085M 11/15/19...

  • Page 43: Troubleshooting

    Debris & dirt lodged in rotor “Plugged Chutes & Rotor” on page 33 Inspect straightness of rotor and rotor shaft. Replace as Bent rotor rotor and/or rotor shaft if bent. Driveline Vibrates Worn Universal Joint Replace Universal Joint. 11/22/19 WC1503 Wood Chipper 328-085M...

  • Page 44: Section 8: Torque Values Chart

    Knife & Ledger, 3/8"-24 x 5/8" GR8 Bolts 35 to 40 ft-lbs. Small Pulley Hub, 5/16"-18 UNC x 1" GR5 Bolts 192 in-lbs. Large Pulley Hub, 3/8"-16 UNC x 1 1/4" GR5 Bolts 348 in-lbs. WC1503 Wood Chipper 328-085M 11/15/19...

  • Page 45: Warranty

    This Warranty is limited to the repair or replacement of any defective part by Land Pride and the installation by the dealer of any such replacement part, and does not cover common wear items. Land Pride reserves the right to inspect any equipment or parts which are claimed to have been defective in material or workmanship.
  • Page 46 Corporate Office: P.O. Box 5060 Salina, Kansas 67402-5060 USA www.landpride.com...

Table of Contents