Table of Contents
Advertisement
1
Press the VCR button.
2
Press the REC(ord)/OTR button to start a recording of
the current channel. Details are on page 31.
3
Press the VCR/TV button to put the VCR in TV position.
The VCR light will disappear from the display panel.
4
Use the TV remote control to select the channel you want
to watch at the TV. Or, if the VCR remote control
operates your TV, press the TV button, then use the
CH(annel) 8/9 button to select the channel you want to
watch at the TV.
The channel selected with the TV controls will appear on the
screen while the channel you previously selected to record is being
recorded. (The \ light will appear on the VCR display panel.)
5
To return to the channel being recorded, use the TV
remote control to select channel 03 or 04 (whichever
channel the CH3/CH4 switch on the back of the VCR is set to).
Or, if the VCR remote control operates your TV, press
the TV button, then use the CH(annel) 8/9 button to
select channel 03 or 04.
6
Press the VCR button.
7
Press the VCR/TV button to put the VCR in VCR
position. (The VCR light will appear on the display panel.) The
channel being recorded will appear on the screen.
8
To stop the recording, press the STOP 9 button.
Recording One Channel/Watching Another 35
3,7
CBL / DBS
TV
VCR/TV
POWER
QUICK PROGRAMMING
+
+
1
2
START
STOP
-
-
4
5
DBS
DAILY
WEEKLY
7
8
0
SPEED
CLEAR
STILL/SLOW
-
REW
PLAY
8
STOP
VOL
MENU
EXIT/STATUS
TIMER
SMARTPICTURE
INDEX
JOG/SHTL
REV
Helpful Hint
• If you use a Cable Box/DBS, you
may not be able to watch one
channel while recording another.
See pages 8-9 for details.
1,6
VCR
4,5
EJECT
3
DATE
6
9
+
FF
/OK
CH
AUDIO/MUTE
/OTR
2
REC
REC
FWD
Advertisement
Table of Contents
