Radio Mode; Switching To Radio Mode; Rds Function (Af, Reg); Selecting The Waveband/Memory - Blaupunkt Bologna C52 Operating Instructions Manual

Radio mode

This unit is equipped with an RDS radio
receiver. Many of the receivable FM sta-
tions transmit a signal that not only car-
ries the programme but also additional
information such as the station name
and programme type (PTY).
The station name appears on the dis-
play as soon as it is received.

Switching to radio mode

If you are in cassette, CD changer or
AUX mode,
press the BND/TS button 5
or
keep pressing the SRC button @
until "RADIO" appears in the dis-
play.

RDS function (AF, REG)

The RDS functions AF (Alternative Fre-
quency) and REG (Regional) extend
your radio's range of functions.
AF: If this RDS function is activat-
ed, the unit automatically tunes into
the best receivable frequency for
the station that is currently set.
REG: Some radio stations set
aside some of their broadcasting
time for regional programmes that
provide different regional content.
With the REG function, your car ra-
dio is prevented from switching to
alternative frequencies with a dif-
ferent regional content.
Note:
REG has to be specially activated/
deactivated in the unit's menu.
Switching REG function on/off
To use the RDS functions AF and REG,
press the MENU button 8.
Press the or
edly until "REG" appears on the
display. "OFF" or "ON" will be dis-
played alongside "REG".
To switch REG on or off, press the
button :.
or
Press the MENU button 8 or OK
;.
Switching the RDS convenience
function on/off
To use the RDS functions AF and
REG, press the RDS button 4.
The RDS convenience functions are
active when RDS lights up on the dis-
play with a symbol. When the RDS con-
venience functions are activated, "REG
ON" or "REG OFF" appears briefly on
the display.
Selecting the waveband/
memory
This unit can receive programmes
broadcast over the FM as well as MW
and LW (AM) waveband. There are
three preset memory levels for the FM
range and one each for the MW and
LW ranges.
Six stations can be stored on each
memory level.
In order to switch between memory
levels or wavebands, briefly press
the BND/TS button 5.
RADIO MODE
button : repeat-
33