Child Lock 21 - Philips VRA431AT Owner's Manual

Child Lock prevents use of the VCR by deactivating the VCR fea-
ture buttons on the VCR and the remote control. To set the
Child Lock, turn on the VCR power, then follow the steps below.
1
Press the VCR button.
2
Press and hold the POWER button on the remote con-
trol until PL appears on the display panel. The VCR will
turn off.
When Child Lock is activated:
The time will appear on the display panel. PL will appear on the
display panel for two seconds every minute.
You may insert a tape. However, the VCR power will remain
off and tape playback will not begin.
You may press the EJECT button to remove the tape (unless a
timer recording is programmed).
Timer recordings will take place as scheduled, even if Child
Lock is activated. PL will appear steadily on the display panel
during the timer recording.
The TV and Cable Box/DBS feature buttons of the remote
3
To cancel the Child Lock, press the VCR button, then
press and hold the POWER button on the remote control
for five seconds so that the VCR turns on.

Child Lock 21

2-3
POWER VCR/TV EJECT
1
TV
PLAY
REW F.FWD
STOP
STATUS/EXIT
1 2 3
4 5 6
7 8 9
VCR PLUS+/ENTER ALT. CH
0
SPEED TIME SEARCH PAUSE/STILL
REC/OTR MEMORY SLOW MUTE
3
CH
VOL