Table of Contents
Advertisement
SELECTING DIFFERENT PLAY OPTIONS − MODE
(remote control only)
1
Press MODE repeatedly during playback or stop to select either:
–
Shuffle album once (MP3/WMA only)
–
Shuffle all tracks of a disc once (MP3/WMA/ CDDA)
–
Shuffle repeat album (MP3/WMA)
–
Shuffle repeat all tracks of disc
(MP3/WMA/CDDA)
–
repeat one track ( MP3/WMA/CDDA)
–
repeat Album ( MP3/WMA)
–
repeat all tracks ( MP3/WMA/CDDA)
2
Playback starts in the selected mode after 2 seconds.
3
To return to normal playback, press MODE repeated-
ly until the play option icons e.g.
appear.
ESP/ POWERSAVING MODE
With a conventional portable CD-player you might have experienced that the
music stopped e.g. when you were jogging. The Electronic Skip Protection (ESP)
prevents loss of sound caused by light vibrations and shocks. Continuous play-
back is ensured. However ESP does not prevent playback interruptions during vig-
orous running. It also does not protect the unit against any damage caused
by dropping!
• To give you optimum playback and help save battery energy, the powersave
mode is selected automatically.
1
No
indication:
– when player operating on AC adapter power. ESP option deactivated.
Optimum sound quality available.
2
:
in battery operation when ESP mode is automatically activated.
– when the player is free from vibration, powersaving is activated.
3
OOPs:
maximum ESP time exceeded. Playback skips but will resume optimum
playback when the player is free from vibration.
840 SEC MAGIC ESP
Average playing times when ESP skip protection activated:
840s
WMA
(64kbps, equivalent of up to 3 tracks)
420s
MP3
(128kbps, equivalent of up to 3 tracks)
180s
Audio CD
and
dis-
DISPLAY INFORMATION
(for WMA/MP3 tracks only)
• During playback, press and hold MODE 3 seconds to activate the display
option mode. Press MODE briefly again, once or more to change and select
your display option:
– Filename: the track´s file name
– Album: the album´s folder name
– Title: the track´s title (if this ID3 tag information is available)
– Artist: the artist´s name (if this ID3 tag information is available)
– the track type and the elapsed playing time
– Playtime: the elapsed playing time, album number and track number.
Helpful Hint:
The ID3 tag is part of an WMA/MP3 file and contains various track information
such as the track´s title or the artist´s name. Complete the ID3 tag information
with your MP3 encoder software before burning the WMA/MP3-CD.
PROGRAMMING TRACK NUMBERS
(remote control only)
You can select up to 50 tracks and store them in the memory in a desired
sequence. You can store any track more than once.
Select a track with ∞ or §.
1
2
Press PROG to store the track.
is shown and P with the number of stored
PROG
tracks is displayed.
3
Select and store all desired tracks in this way.
If necessary press 2; to stop normal playback. Press 2; to start playback of
4
the program.
Playback of the program starts. PROG indication appears.
Clearing the program
If necessary press 2; for 2-3 seconds to stop play-
1
back.
Press 2; 2-3 seconds to clear the program.
2
Cleared is displayed once.
Helpful Hint:
The program will also be cleared if you interrupt the
power supply or open the CD lid or if the set switches
off automatically. After storing 50 tracks, Prog full is
displayed.
Advertisement
Table of Contents
