Recording - Philips FW768P37 User Manual

RECORDING

MINI HIFI SYSTEM
PROGRAM
REPEAT
NEWS T.A.
STANDBY
ON
CLOCK/
C D 1 • 2 • 3
TIMER
PROG
SEARCH • TUNING
SWITCH OFF DOLBY PRO LOGIC WHEN RECORDING
26
SHUFFLE STEREO
BACK
TIMER REC
FRONT HSD
AM MW FM LW
L
60Hz 250Hz 500Hz 4KHz 8KHz
1KHz 2KHz
PRO LOGIC
S
FM • AM TAPE 1 • 2 CDR
CD TUNER TAPE AUX
A.REV
SIDE A•B PRESET
STOP• CLEAR PLAY PAUSE PREV NEXT
SOUND NAVIGATION
DIGITAL SOUND DYNAMIC BASS
CONTROL BOOST
Notes:
– For recording, use only tape of IEC type I
C
(normal tape) or IEC type II (Cr0 2 ).
R
– The tape is secured at both ends with
DOLBY B
S
NR
leader tape. At the beginning and end of
RDS
tape, nothing will be recorded for six to
NEWS!
seven seconds.
– The recording level is set automatically,
regardless of the position of Volume,
DBB or DSC.
VOLUME – To prevent accidental recording, break
out the tab on the left shoulder of the
tape side you want to protect.
– If " CHECK TAPE " is displayed, the
protection tab has been broken. Put a
piece of clear adhesive tape over the
opening. Do not cover the Cr0 2 tape
detection hole when covering the tab
opening.
Recording from other sources
(only on tape deck 2)
1 Press TAPE ( TAPE 1•2 ) to select tape
deck 2.
2 Load a blank tape into tape deck 2 with
the open side downward.
3 Press SIDE on remote control to select
the recording side.
™ The or
BACK
displayed, depending on the side
selected.
4 Press A. REV to select the playback
mode ( å å å å å or ∂ ∂ ). ∂ ∂ ∂
5 Press CD, TUNER or AUX.
• Start playback of the selected source.
6 Press REC to start recording.
™ The
7 Press Ç to stop recording.
Notes:
– Only å å å å å or ∂
during recording .
– During recording, it is not possible to
listen to another source.
Dubbing tapes
tape deck 2)
1 Press TAPE ( TAPE 1•2 ) to select tape
deck 2.
2 Load the prerecorded tape into tape
deck 1 and a blank tape into tape deck
2.
™ Make sure that both tapes have their
full spool to the left.
3 Press SIDE on the remote control to
select the recording side.
4 Press DUB (HSD) once for normal
speed dubbing or twice (within 2
seconds) for high speed dubbing.
™ "NORMAL" (normal speed) or
"FAST" (high speed) will be
displayed, followed by
"DUBBING".
™ The
flag will be
FRONT
during high speed dubbing.
• Dubbing will start immediately.
™ The
5 Press Ç to stop dubbing.
flag starts flashing.
REC
∂ mode is available ∂ ∂ ∂
(from tape deck 1 to
flag appears on the display
HSD
flag starts flashing.
REC