Step 1: Connecting Fm/Mw Antennas; Step 2: Connecting The Speakers; Step 3: Connecting To Pc; Step 4: Connecting To Game Console - Philips FWM779/22 User Manual

Warning!
– Use only the supplied speakers.
The combination of the main unit and
speakers provide the best sound.
Using other speakers can damage the
unit and sound quality will be negatively
affected.
– Never make or change connections
with the power switched on.
– Connect the AC power cord to the
power outlet only after you have finished
hooking up everything.
Step 1: Connecting FM/MW
antennas
– Place the MW loop antenna on a shelf or
attach it to a stand or wall.
– Extend the FM antenna and fix its ends to the
wall.
– Adjust the position of the antennas for
optimal reception.
– Position the antennas as far as possible from a
TV, VCR or other radiation source to prevent
unwanted noise.
– For better FM stereo reception, connect
external FM antenna.
Step 2: Connecting the
speakers
Connect the speaker wires to the SPEAKERS
terminals, right speaker to "R" and left speaker to
"L", coloured (marked) wire to "+" and black
(unmarked) wire to "-". Fully insert the
stripped portion of the speaker wire into the
terminal as shown.
Notes:
– Ensure that the speaker cables are correctly
connected. Improper connections may damage the
system due to short-circuit.
– Do not connect more than one speaker to any
one pair of + / - speaker terminals.
Step 3: Connecting to PC
Use the supplied USB cable to connect the
system to your personal computer's USB port.
After installing the USB PC LINK application
software onto your PC, you can play your music
collection via the system (refer to "USB PC
Link").
Step 4: Connecting to game
console
IMPORTANT!
Gameport inputs are solely for game
console only.
a.
Use the game console's video cable (not
supplied) to connect its video output to the
GAMEPORT-VIDEO terminal.
b.
Use the game console's audio cables (not
supplied) to connect its audio outputs to the
GAMEPORT-AUDIO L. / AUDIO R.
terminals.
c.
Use the video cable (yellow) to connect the
VIDEO OUT terminal to the video input on
the TV for viewing.
Notes:
– On the TV, the Video Input jack is usually yellow
and might be labeled A/V In, CVBS, Composite or
Baseband.
– To avoid magnetic interference, do not position
the front speakers too close to your TV.
– For optimal enjoyment of your Gaming
Experience, please do not connect the TV's AUDIO
OUT to the audio system's AUX IN (R/L) terminals.
– If you want to listen to your favorite movies/TV
programs through the Philips Mini System, please
disconnect the Game Console connection on the
front of the set to avoid any unwanted noise.
Connections
11