Basic Functions
IMPORTANT!
Before you operate the system, complete
the preparation procedures.
Switching the system on
●
Press 2 STANDBY-ON.
➜
The LCD display lights up. The system will
switch to the last selected source.
●
Press VCD/CD, TUNER, TAPE or AUX on
the remote control (TUNER/BAND, DISC,
or TAPE/AUX on the system.)
➜
The system will switch to the selected source.
To switch the system to standby mode
●
Press 2 STANDBY-ON.
➜
The LCD display lights off. The set clock time
will be displayed. If the clock time is not set,
-- -- : -- -- is displayed (See Clock setting).
12
Adjusting volume and sound
1
Adjust the VOL control (or press
VOL –/+ on the remote) to decrease or
increase volume of the system.
➜
Display briefly shows VOL and a number
from 00 to 40 to indicate the volume level.
2
Press DSC repeatedly to select the desired
sound effect: ROCK/JAZZ/POP/CLASSIC.
➜
Display shows selected sound option.
3
Press DBB to switch bass enhancement on or
off.
➜
If activated, DBB is displayed.
To switch off the volume temporarily
●
Press MUTE on the remote control.
➜
Playback will continue without sound and
is displayed.
●
To restore the volume, press MUTE again or
increase the volume level.
.
VCD/CD
TUNER
TAPE
AUX
ECHO
KEY
PROG
ALBUM
ALBUM
PAL/
DBB
DSC
NTSC
REPEAT
SHUFFLE
REPEAT
ZOOM
A-B
DISPLAY
PBC
RETURN
DIGEST
OSD
GOTO
RESUME
SLOW AUDIO/VOCAL
CLOCK SET
TIMER
SLEEP
MUTE