Improving The Image For Progressive Scan Video; Setting The Screen Saver; Night Mode - Turning On/Off; Test Tone - Philips FWD186/98 User Manual

DVD Menu Operations
Improving the image for progressive scan
video output setting
This feature is only applicable when you have
connect this system to a Progressive Scan TV
system throngh the Component Video jacks
TV SHAPE
TV SYSTEM
PROGRESSIVE
SCR SAVER
PROGRESSIVE NOW OFF
Off
Select this a conventional TV set is connect to
yor system.
On
To enjoy the full quality potential offered by
progressive scan feature, a progressive scan TV
set is reqquired.
You can press and hold OPEN / ClOSE on the
panel and 1 on remote control for more than 5
seconds to exit progressive scan .
Notes:
- A progressive scan TV set is required.
-The progressive scan video quality is only possible
through PR PB Y output connection.

Setting the screen saver

TV SHAPE
TV SYSTEM
PROGRESSIVE
SCR SAVER
SCREEN SAVER NOW ON
If set to ON, the screen saver will be activated
when you leave the system in stop or pause
mode for 5 minutes. The default setting is ON.
32
PBC
OFF
ON
PBC
1
OFF
ON
2
3

Night mode - turning on/off

NIGHT MODE
CEBTER DELAY
REAR DELAY

TEST TONE

NIGHT MODE SET TO OFF
Off
Select this when you want to enjoy the surround
sound with its full dynamic range.
On
Select this to level out the volume. High volume
output will be softened and low volume output
will be brought upward to an audible level. This
feature is only available for movies with Dolby
Digital mode.
Test Tone
NIGHT MODE
CEBTER DELAY
REAR DELAY
TEST TONE
TEST TONE OFF
If you have turned on the test tone, the test
signal will be automatically generated to help
you judge the sound level of each speaker.
In disc mode, press SYSTEM MENU.
➜ Use the 1 / ¡ / 5 / 4 keys on the
remote to navigate in the menu.
Highlight icon and press 4.
and press ¡.
Move to
Move to {TEST TONE} and press ¡.
Press 34 to select a setting.
PBC
OFF
ON
PBC
OFF
ON