ADEMCO 7825 Installation Instructions

N7651 2/95
Nom 7825
OUTDOOR ANTENNA
WITH BRACKET
INSTALLATION INSTRUCTIONS
The No. 7825 Outdoor Antenna with Bracket is intended for general outdoor use with Ademco Long Range Radio
products.
It includes a wall/Dole mountirm bracket, and a connector cable assemblv with weather-resistant protective rubber
boot. Screws and" anchors for fiall mounting are provided.
h
t
~
VERTICAL
MAXIMUM METAL
PIPE OR SURFACE
Figure 1 identifies
the various parts
of the 7825
HEIGHT >
J
L
r
1
'i I
PIPE/POLE 5-314"
c
I
9-518"
AITACH RUBBER BOOT
TO THIS CYLINDER
N CONNECTOR
.,
'i \\.
li
\[
~
& SLOTS "A (3)
FOR WALIJFLOOR
— AwB~
\
BRACKET MOUNTING
BA
\ SLOTS "B"(4) FOR pc)LE/plFIEMOUNTING
'(USE TWO 2-'1/4" U-BOLTS)
Figure 1
+
The unit may be mounted in several ways,
but it must be
mounted vefiically.
1)
2)
3)
The bracket may be mounted to a wall, by using the
#1 O screws and wall anchors provided. Slots "A" (see
Figure 1) should be used.
Figure 2 shows it mounted to a pole or pipe with
two 2-1/4" U-Bolts (not provided). Slots "B" (see
Figure 1) should be used. Be
sure that the pole/pipe
does not extend above the base of the antenna.
An optional No. 7825MB Floor Mount Bracket is
available and is shown and described in Figure 3.
Figure 2