Inspection.for.ae-Ccd.positioning - Nikon D5100 Repair Manual
Hide thumbs
Also See for D5100:
- User manual (365 pages) ,
- Reference manual (260 pages) ,
- Manual (71 pages)
Table of Contents
Advertisement
•
Solder the two wires on the main condenser (#6004).
•
Attach the tape [TA-0015 (13×28)].
[Orange]
Inspection.for.AE-CCD.positioning
Note:.As.for.this.product,.make.only.the.inspection.for.the.AE-CCD.positioning.
Caution:.If.the.secondary.rechargeable.battery.of.the.TOGO.PCB.has.no.capacity.left,.it.may.be.
•
Mount the front cover (#24), and tighten the three screws (#631) (for temporary assembly).
•
Refer to "Inspection and adjustment for AE-CCD positioning" of ADJUSTMENT Separate Volume ②.
for.details.
User ID:NHK
[Blue]
#6004
impossible.to.communicate.with.the.PC...In.this.case,.mount.the.top.cover.and.rear.cover,.
and.then.set."time.zone".and."date.and.time".on.the.menu.
#24
- A41 ・ D5100 -
VBA31001-R.3825.A
TA-0015 (13x28)
Attaching.position
#631×3
Advertisement
Table of Contents
