Telex Audiocom Series User Manual page 2

P N
ROPRIETARY OTICE
The product information and design disclosed herein were originated by and are
the property of Bosch Security Systems, Inc. Bosch reserves all patent, propri-
etary design, manufacturing, reproduction, use and sales rights thereto, and to any
article disclosed therein, except to the extent rights are expressly granted to oth-
ers.
C N
OPYRIGHT OTICE
Copyright 2009 by Bosch Security Systems, Inc. All rights reserved. Reproduc-
tion, in whole or in part, without prior written permission from Bosch is prohib-
ited.
W N
ARRANTY OTICE
See the enclosed warranty card for further details.
C S
USTOMER UPPORT
Technical questions should be directed to:
Customer Service Department
Bosch Security Systems, Inc.
12000 Portland Avenue South
Burnsville, MN 55337 USA
Telephone: 1-877-863-4169
Fax: 800-323-0498
Factory Service: 800-553-5992 (Lincoln, NE)
R S I
ETURN HIPPING NSTRUCTIONS
Customer Service Department
Bosch Security Systems, Inc. (Lincoln, NE)
Telephone: 402-467-5321
Fax: 402-467-3279
Factory Service: 800-553-5992
Please include a note in the box which supplies the company name, address,
phone number, a person to contact regarding the repair, the type and quantity of
equipment, a description of the problem and the serial number(s)
THE LIGHTNING CAUTION: TO REDUCE THE
FLASH AND RISK OF ELECTRIC SHOCK,
ARROWHEAD DO NOT REMOVE COVER.
WITHIN THE NO USER-SERVICABLE
TRIANGLE IS A PARTS INSIDE. REFER
WARNING SIGN SERVICING TO QUALIFIED
ALERTING YOU OF SERVICE PERSONNEL.
"DANGEROUS
VOLTAGE" INSIDE
THE PRODUCT.
SEE MARKING ON BOTTOM/BACK OF PRODUCT
WARNING: APPARATUS SHALL NOT BE EXPOSED TO DRIPPING OR
SPLASHING AND NO OBJECTS FILLED WITH LIQUIDS, SUCH AS VASES,
SHALL BE PLACED ON THE APPARATUS.
WARNING: THE MAIN POWER PLUG MUST REMAIN READILY OPERABLE
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, GROUNDING OF
THE CENTER PIN OF THIS PLUG MUST BE MAINTAINED.
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT
EXPOSE THIS APPRATUS TO RAIN OR MOISTURE.
WARNING: TO PREVENT INJURY, THIS APPARATUS MUST BE SECURELY
ATTACHED TO THE FLOOR/WALL/RACK IN ACCORDANCE WITH THE
INSTALLATION INSTRUCTIONS.
This product is AC only.
S
HIPPING TO THE
All shipments of product should be made via UPS Ground, prepaid (you may
request from Factory Service a different shipment method). Any shipment
upgrades will be paid by the customer. The equipment should be shipped in the
original packing carton. If the original carton is not available, use any suitable
container that is rigid and of adequate size. If a substitute container is used, the
equipment should be wrapped in paper and surrounded with at least four (4)
inches of excelsior or similar shock-absorbing material. All shipments must be
sent to the following address and must include the Proof of Purchase for warranty
repair. Upon completion of any repair the equipment will be returned via United
Parcel Service or specified shipper, collect.
Factory Service Department
Bosch Security Systems, Inc.
8601 East Cornhusker Hwy.
Lincoln, NE 68507 U.S.A.
Attn: Service
This package should include the following:
PS-2001L
Qty.
1
1
1
4
1
1
.
1
SPS-2001
1
1
THE
EXCLAMATION
1
POINT WITHIN
THE TRIANGLE IS 4
A WARNING SIGN
1
ALERTING YOU
OF IMPORTANT
1
INSTRUCTIONS
ACCOMPANYING
1
THE PRODUCT
1
FCC STATEMENT
This equipment uses, and can radiate radio frequency energy that may cause inter-
ference to radio communications if not installed in accordance with this manual.
The equipment has been tested and found to comply with the limits of a Class A
computing device pursuant to Subpart J, Part 15 of FCC Rules which are designed
to provide reasonable protection against such interference when operated in a com-
mercial environment. Operation of this equipment in a residential area may cause
interference which the user (at his own expense) will be required to correct.
M
ANUFACTURER
Description
PS-2001L Final Assembly
User Manual
Warranty Statement
Rubber Feet
Power Cord, Black
Int'l Cordsets, if applicable
Statement of Conformity
SPS-2001 Final Assembly
User Manual
Warranty Statement
Rubber Feet
Power Cord, Black
Int'l Cordsets, if applicable
Patch Cord
Statement of Conformity
Part No.
9010769-000 (US)
or
90107699001 (EU)
9350-7699-000
38110-390
56471-001
2504-0003-00
550024000
38109-675
9010-7699-000 (US)
or
90107699-001 (EU)
9350-7699-000
38110-390
56471-001
2504-0003-00
550024000
50628-003
38109-675