Using S-Video In Jack; Using Headphone Jack; Using An Accessory Rf Modulator - Philips FWD872/98 User Manual

Connections

Using S-Video In jack

●
Use the S-Video cable (not supplied) to connect
the system's S-VIDEO jack to the S-Video
input jack (or labeled as Y/C or S-VHS) on the
TV set.
●
To listen this system channels through TV , use
the audio cables (white/red) to connect AUX
IN (L/R) jacks to the corresponding AUDIO
OUT jacks on the TV set

Using Headphone jack

●
To listen to TV channels through this system, use
the audio cables (white/red, not supplied) to
connect AUX IN (L/R) jacks to the
HEADPHONE jacks on the TV set (With a
diameter 3.5mm stereo jack).
12

Using an accessory RF modulator

IMPORTANT!
– If your TV set only has a single
Antenna In jack (or labeled as 75 ohm or
RF In), you will need a RF modulator in
order to view the DVD playback via TV.
See your electronics retailer or contact
Philips for details on RF modulator
availability and operations.
●
Use the composite cable (yellow) to connect the
system's VIDEO jack to the video input jack on
the RF modulator.
●
Use the RF coaxial cable (not supplied) to
connect the RF modulator to your TV's RF jack.