Backlight Settings; Screen Capture - Navico Simrad I3005 Operator's Manual

Backlight settings

The display backlight can be adjusted at any time from the
backlight settings dialog.
To access the dialog:
• Press the brilliance key
Repeated short presses on the brilliance key cycles thru the preset
backlight levels.
Ú Note:
All changes made to the display setup will apply to all
units belonging to the same display group. For more
information about network groups, refer to "Software setup" on
page 22.

Screen capture

To take a screen capture:
• Press the screen for 5 seconds
The screen capture function is only available when a memory card is
inserted in the unit. Screen captures are automatically saved to the
memory card.
Basic operation | I3005/I3007 Operator Manual
13