Connecting Your Monitor
WARNING: Before you begin any of the procedures in this section, follow the
Safety
Instructions.
To connect your monitor to the computer:
1 Turn off your computer.
2 Connect the DP/HDMI/USB type-C cable from your monitor to the computer.
3 Switch on your monitor.
4 Select the correct input source at monitor OSD Menu and turn on your computer.
NOTE: U2720Q/U2720QM default setting is DP 1.4. A DP 1.1 Graphic card
may not display normally. Please refer to
using DP connection to the
Connecting the HDMI cable
HDMI
Connecting the DP cable
DP
26
|
Setting Up the Monitor
"product specific problems – No image when
PC" to change default setting.
HDMI
DP