Steps For Determining Correct Load Limit - Mercedes-Benz GLE Series 2020 Operator's Manual

500 Wheels and tires
Recommended tire pressures 1
R
tires. The recommended tire pressures are
valid for the maximum permissible load and
up to the maximum permissible vehicle
speed.
Please also note:
Information on permissible weights and loads
R
on the vehicle identification plate
( page 527).
/
Information on tire pressure in the tire pres‐
R
sure table ( page 493).
/
Further related subjects:
Determining the maximum permissible load
R
( page 500)
/
Notes on tire pressure ( page 492).
/
R

Steps for Determining Correct Load Limit

The following steps have been developed as
required of all manufacturers under Title 49,
Code of U.S. Federal Regulations, Part 575, pur‐
suant to the "National Traffic and Motor Vehicle
Safety Act of 1966".
for cold (1): Locate the statement "The combined
#
weight of occupants and cargo should never
exceed XXX kg or XXX lbs." on your vehicle's
placard.
(2): Determine the combined weight of the
#
driver and passengers that will be riding in
your vehicle.
(3): Subtract the combined weight of the
#
driver and passengers from XXX kg or
XXX lbs.
(4): The resulting figure equals the available
#
amount of cargo and luggage load capacity.
For example, if the "XXX" amount equals
1400 lbs. and there will be five 150 lb pas‐
sengers in your vehicle, the amount of availa‐
ble cargo and luggage load capacity is
650 lbs. (1400 - 750 (5 x 150) = 650 lbs.)
(5): Determine the combined weight of lug‐
#
gage and cargo being loaded on the vehicle.
The weight may not safely exceed the availa‐
ble cargo and luggage load capacity calcula‐
ted in Step 4.
(6): If your vehicle will be towing a trailer,
#
load from your trailer will be transferred to
your vehicle. Consult this manual to deter‐
mine how this reduces the available cargo
and luggage load capacity of your vehicle.
% Not all vehicles are permitted to tow a
trailer. Towing a trailer is only permitted if a
trailer-hitch is installed. Please consult an
authorized Mercedes-Benz dealer if you have
any questions about towing a trailer with
your vehicle.
Even if you have calculated the total load care‐
fully, you should still make sure that the maxi‐
mum permissible gross weight and the maxi‐
mum gross axle weight rating of your vehicle are
not exceeded. Details can be found on the vehi‐
cle identification plate.
Have your loaded vehicle – including driver,
#
occupants and load – weighed on a vehicle
weighbridge.
The measured values may not exceed the
maximum permissible values stated on the
vehicle identification plate.
Further related subjects:
Calculation example for determining the max‐
R
imum load ( page 501)
/