Reversing The Door - NewAir AB-1200X Owner's Manual

consumption. Extreme cold or hot ambient temperatures may also
prevent proper performance.
4. Once the cooler is plugged in, let the beverage cooler run for at least
30 minutes. Do not change the temperature or adjust any settings at
this time.
ASSEMBLING THE DOOR
1. Remove all packaging from the door handle and screws.
2. Pull back the rubber gasket on the inside of the door, so that the openings
for the screws can be seen.
3. Hold the door handle lined up with the screw holes, and screw them into
the back of the handle from the inside of the door.
4. Once the screws are fully inserted and the handle is snugly attached, press
the rubber gasket back into the door frame.
REVERSING THE DOOR SWING
5. To reverse the door swing of the unit, remove the plastic hinge cover at
top of the unit.
6. Unscrew the door hinge.
7. Flip door upside-down.
8. Attach door to opposite side of unit with screws.
9. Replace plastic door hinge cover.
INSTALLING YOUR SPLIT SHELF
The top zone of the fridge comes with an adjustable split shelf configuration for
your beverages, enabling you to have either a full-sized shelf or a half-sized
shelf to accommodate different sized cans or bottles.
To install, simply remove the first shelf from the top zone of the fridge and
replace with the included half-sized shelf.
8
newair.com