Loading The Racks - Whirlpool WSFE2B19UK User Manual

LOADING THE RACKS

UPPER RACK
(loading example for the upper rack)
ADJUSTING THE HEIGHT OF THE UPPER
RACK
The height of the upper basket can be adjusted:
high position to place bulky crockery in the
lower basket and low position to make the
most of the tip-up compartments by creating
more space upwards.
The upper rack is equipped with a Upper Rack
height adjuster (see gure), without pressing
the levers, lift it up by simply holding the rack
sides, as soon as the rack is stable in its upper
position. To restore to the lower position, press
the levers (A) at the sides of the rack and move
the basket downwards.
We strongly recommend that you do not adjust the height of
the rack when it is loaded.
NEVER raise or lower the basket on one side only.
FOLDABLE FLAPS WITH ADJUSTABLE POSITION
The side foldable aps can be positioned at
three di erent heights to optimize the
arrangement of crockery inside the rack. Wine
glasses can be placed safely in the foldable
aps by inserting the stem of each glass into
the corresponding slots. For optimum drying
results incline the fol-dable aps more. To
change the inclination, pull up the foldable
ap, slide it slightly and position it as you
wish.
8
Load delicate and light dishes:
glasses, cups, saucers, low salad
bowls.
LOWER RACK
For pots, lids, plates, salad bowls,
cutlery etc... Large plates and lids should
ideally be placed at the sides to avoid
interferences with the spray arm.
(loading example for the lower rack)
CUTLERY BASKET
It is tted with top grids for improved cutlery arrangement. It must
only be positioned at the front of the lower rack.
Knives and other utensils with sharp edges must be placed in the
cutlery basket with the points facing downwards or they must be
positioned horizontally in the tip-up compartments on the upper
rack.
EN
8