Setting The Sensitivity Of Station Seek Tuning; Scanning Receivable Stations (Scan); Setting The Scanning Time - Blaupunkt 7 644 820 310 Operating Instructions Manual

RADIO MODE
Setting the sensitivity of station
seek tuning
You can choose whether the radio
should only tune into stations providing
good reception or whether it can also
tune into those with a weak reception.
Press the TUNER button = while
in radio mode.
The radio functions menu appears in the
display.
Press the NEXT button 4.
Note:
If you open the radio functions menu
while in MW or LW radio mode, the
softkey assigned to the "SENS" display
item will appear on the first page.
Press the softkey 5 assigned to
the "SENS" display item.
Press the softkey 5 assigned to
the "FM" or "AM" display item to
adjust the sensitivity for "FM" or
"AM".
Move the joystick 8 up/right or
down/left to adjust the sensitivity.
You can adjust the sensitivity in steps
from 1 to 6. "SENSITIVITY 1" is the low-
est setting and "SENSITIVITY 6" is the
highest sensitivity setting for distant sta-
tions.
Press the joystick OK 8 or the
MENU button 9 to close the
menu.
The settings are saved.
76
Scanning receivable stations
(SCAN)
You can use the scan function to briefly
play all the receivable stations.
You can set the scanning time to be-
tween 5 and 30 seconds in the menu.
Starting SCAN
Press and hold down the joystick
OK 8 for longer than two sec-
onds.
Scanning begins. "SCAN" appears
briefly in the display followed by the
current station name or frequency of the
station.
Cancelling SCAN and continuing
listening to a station
Press the joystick OK 8.
Scanning stops and the radio continues
playing the station that it tuned into last.

Setting the scanning time

Press the MENU button 9.
Press the softkey 5 assigned to
the "VARIOUS" display item.
Press the softkey 5 assigned to
the "SCANTIME" display item.
Move the joystick 8 up/right or
down/left to adjust the scanning
time.
Press the joystick OK 8 or the
MENU button 9 to close the
menu.
The settings are saved.