Wear a full face shield if you are producing metal filings or wood chips. Wear an ANSI approved dust mask or respirator when working around metal, wood, and chemical dusts and mists. Do not overreach. Keep proper footing and balance at all times. Do not reach over or across running machines. SKU 09631 Page 2...
Page 3
21. Use tools with both hands when required. Many tools such as chain saws, drills, routers, etc., require the use of both hands when operating. This helps maintain tool stability and keeps hands away from the working area of the tool. SKU 09631 Page 3...
Page 4
Mount the 10 Inch Compound Slide Miter Saw to the Stand Table Top using Bolts (11), Lock Washer (12), Large Washer (13), and Nut (14) in four places. Refer to the photo on the next page. SKU 09631 Page 4...
Side Cross Frame, Lower Side Cross Frame, Upper Cross Frame, Upper Bolt Washer, Lock Washer, Large Feet, Rubber NOTE: Some parts are listed and shown for illustration purposes only and are not avail- able individually as replacement parts. SKU 09631 Page 5...
Page 6
SHOULD BE UNDERTAKEN BY CERTIFIED AND LICENSED TECHNICIANS AND NOT BY THE BUYER. THE BUYER ASSUMES ALL RISK AND LIABILITY ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO, OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO. SKU 09631 Page 6...