Advertisement
NAMEPLATE OPTIONS
This instruction sheet explains how to install a nameplate onto a wood-
burning stove or insert. Your new Country Collection™ wood-burning
appliance includes a nickel Country nameplate in the manual packet and
a nickel Lennox™ nameplate installed on the appliance.
REPLACEMENT KIT CONTENTS (See Figure 12)
The contents below ship separately with Cat. # H8079 and H8080
1 ea. Instruction Sheet
2 ea. #6 x 1" Carriage Bolt (item #1)
2 ea. #6 Nut (item #2)
1 ea. Nameplate - Lennox (Gold or Nickel, item #3)
1 ea. Nameplate - Country (Gold or Nickel, item #3)
Cat. #
H8079
Nameplate Kit with Hardware - Nickel
H8080
Nameplate Kit with Hardware - Gold
TOOLS NEEDED
Open End Wrench - 5/16"
INSTALLATION INSTRUCTIONS
Step 7. Align nameplate on the center of the smoke hood.
Step 8. Insert carriage bolts through nameplate and smoke hood.
Step 9. Open the firebox door to allow access to the underside of the
smoke hood and secure the carriage bolts using the #6 nuts.
REMOVAL INSTRUCTIONS
Remove the nameplate in the reverse order of installation.
Lennox Hearth Products reserves the right to make changes at any time, without notice, in
design, materials, specifications, prices and also to discontinue colors, styles and products.
Consult your local distributor for fireplace code information.
Printed in U.S.A. © 200 Lennox Hearth Products
P/N 506033-33 Rev. NC 03/200
4
Description
NOTE: DIAGRAMS & ILLUSTRATIONS ARE NOT TO SCALE.
Figure 11
3
2
2 ea. #6 x " Carriage Bolt (item #)
2 ea. #6 Nut (item #2)
ea. Nameplate - Lennox (Gold or Nickel, item #3)
ea. Nameplate - Country (Gold or Nickel, item #3)
Figure 12
0 West Taft Avenue • Orange, CA 92865
Smoke Hood
Advertisement
