Siemens RXB Series Basic Documentation page 27

Plant operation = Off
Action
Return to main menu
Action
Plant stops
Action
Action
Communication
Action
For internal use only
Siemens
Building Technologies
Plant operation
Preselection: Off
State: Off
Cause: Plant op selector
Select "Off" on the "Preselection" line and acknowledge by pressing the OK knob.
Press ESC to return to the "Main menu" page.
Main menu
Commissioning...
Time switch...
Room operating mode...
Plant operation...
Select "Commissioning" and press the knob.
Before the "Commissioning" page is displayed, the following warning appears:
Caution!
Plant stops
ESC OK
Acknowledge the display
"Commissioning" page now appears.
Commissioning
Basic configuration...
Extra configuration...
Settings...
Communication...
Select the "Communication" line for example by rotating the knob, and press the
knob to open the "Communication" page.
Main menu > Commissioning > Communication
Communication
Basic settings...
Room...
Holidays/special days...
Distribution zones...
Press the knob to access the "Basic settings" page
KNX bus communications
Commissioning notes
OK
by pressing the knob (the plant stops). The
27 / 88
CE1P3127en
2013-04-08