Installation instructions
for contractors
Cylinder demand terminal box
for the Vitodens 100-W
Safety instructions
Please follow these safety instructions closely to prevent accidents and
material losses.
Installation, initial start-up, inspection,
maintenance and repairs must only be
carried out by a competent person (heat-
ing engineer/installation contractor).
Before working on the equipment/heat-
ing system, isolate the power supply
(e.g. by removing a separate mains fuse
or by means of a mains isolator) and
safeguard against unauthorised recon-
nection.
Function
The heat demand issued by the cylinder
thermostat is transferred via the terminal
box to the boiler control unit.
5366 018 GB
4/2012
VIESMANN
When using gas as fuel, also close the
main gas shut-off valve and safeguard
against unauthorised reopening.
Repairing components which fulfil a
safety function can compromise the safe
operation of your heating system.
For replacements, use only original
spare parts supplied or approved by
Viessmann.
Dispose after installation.