Advertisement
8 INPUT (A–D) keys and indicators
Control and show the assignment of inputs
D
to the mixer channels.
9 AUX INPUTS key and indicator
trols and shows the assignment of the
to the mixer channels.
A TRACK key and indicator
show the assignment of recorded tracks to the mixer
channels and virtual tracks to active tracks.
B STEREO key and indicator
show the assignment related to the
channels as well as settings for these channels
C SUB MIX key and indicator
show the assignment of the 788's internal sub-mixer,
as well as the settings for the sub-mixer.
D EFFECT 2 key and indicator
and shows the settings and assignments of the second
internal effector.
E MONITOR SELECT key and
indicators
Controls and show the signals that are
sent from the
MONITOR OUT
Shifted, this key allows mono monitoring.
F EJECT/SHUT key and indicator
to shut down the 788, and eject removable media,
and to show the status of the shutdown process.
G UNDO [REDO] key
undo and redo of recording, editing operations, etc.
H TRACK EDIT key
destructive track editing functions (cut, move, etc.).
I MENU [TITLE]
Used unshifted to enter the
system menus. Shifted, this key enters titling mode
(songs, library entries, virtual tracks, etc.).
J HOME/ESC key
"home" screen.
K CUE key and indicator
shows the replay of the track cue signals from the
and
MONITOR OUTPUTS
L SELECT keys and indicators
assign inputs to mixer channels, to link channels in
stereo pairs, to select channels for parameter adjust-
ment and soloing, tracks for virtual track assignment,
etc.
M SOLO key and indicator
and show the status of mixer channels selected for
soloing.
N EQ key
Used to bring up the channel equal-
ization adjustment screen.
A
through
Con-
AUX INPUTS
Control and
Control and
pair of
STEREO
Control and
Controls
and
PHONES
jacks.
Used
Used to control the
Used to enter the non-
Returns the display to the
Controls and
connectors.
PHONES
Used to
Used to select
Front panel features
O LOCATE key
Used to recall the list of mem-
ory location points. When shifted, used to input a
memory location point.
P IN, OUT and TO keys
cial location points for auto punch, repeat playback,
location, and track editing purposes. Unshifted, these
keys locate to the playback points. Shifted, they are
used to set the playback points.
Q REC READY keys and indicators
to set and display the recording status of the tracks.
R TRACK CUE key
screen controlling the level and pan of recorded
tracks to the track cue monitoring subsystem.
S SEND key
Used to bring up the screens con-
trolling the level, etc. of the channel sends and master
sends to the Aux and Effect send loops.
T FADER/PAN key
screen controlling pan settings, and providing the
fader view (for use when physical and internal fader
positions do not match).
U SHIFT key
Used with other keys to provide a
secondary function. When used, the
always pressed and held down while the other key is
pressed.
V MARK/CHAR [EDIT] (DELETE
[SILENCE], TRIM [COPY TO], INSERT
[MOVE] keys
Used unshifted to insert/delete
characters in titles, add/remove selections from lists,
and to enter/edit/remove location memories. Used
shifted as short cuts to commonly-used track editing
functions.
W JOG/DATA dial
Used to adjust the playback
position (in jog mode) and to edit parameter data.
X Channel faders
level from the channels (channels 7 and 8 are always
linked together). The
fader setting represents the
0
nominal level.
Y STEREO fader
Used to adjust the level of
the stereo mixed signals from the
OUTPUT
s and from the DIGITAL
fader setting represents the nominal level.
Z AUTO PUNCH key and indicator
to set and display the current auto punch status when
punching new material into previously-recorded
material.
a RHSL key and indicator
display the status of the rehearsal facility used in
recording (including auto punch modes).
TASCAM 788 Brief Guide
Used with three spe-
Used
Used to bring up the
Used to bring up the
key is
SHIFT
Used to adjust the output
STEREO
OUTPUT
. The
0
Used
Used to set and
3
Advertisement
