Required Settings For Special Originals - Epson DS-30000 User Manual

Scanning
>
Scanning with Epson Scan 2
The scanned image is saved to the folder you specified.
Related Information
"Placing Originals" on page 32
&

Required Settings for Special Originals

To scan special originals, specify the necessary settings according to the originals in the Epson Scan 2 window.
You can also specify settings from Document Capture Pro. For detailed information, refer to the following URL:
https://support.epson.net/dcp/
Type of Original Required Settings
Envelopes Select Off in Detect Double Feed.
Plastic cards Select Plastic Card in the Document Size list, or select Off in Detect Double Feed.
❏ If you select Auto Detect from the Document Size list, skewing of the original is automatically
Carrier Sheet
❏ If you select any other size than Auto Detect from the Document Size list, you can only use
Passport
Select Passport from the Document Size list. Also select Single-Sided in Scanning Side.
When you select any other option than Passport in Document Size, it cannot be scanned properly.
Large size originals If the size of the original you want to scan is not listed in Document Size, select Customize to open
the Document Size Settings window. Next, create the size manually on the window.
Thin paper If text is blurry when scanning thin paper, set this to White. This may allow clear or distinct
scanning.
Make the following settings when you cannot select White as the Background Color.
❏ Select anything except for Auto Detect or Passport as theDocument Size.
❏ Select anything except for Paper Skew as theCorrect Document Skew.
❏ If images on the back of the original for thin paper appear in the scanned image, set this to
Long paper If the size is not listed on the Document Size list, select Auto Detect (Long Paper) or select
Customize to create a custom document size.
Laminated cards
To scan transparent areas around the document, select Customize in the Document Size list to
open the Document Size Settings window. Next, select Scan laminated card in the displayed
window.
Note:
Some originals cannot provide the appropriate effect as expected. If transparent areas around
the document cannot be scanned, select Customize from the Document Size list, and then
create the size manually.
>
Required Settings for Special Originals
corrected even if you select Off in Correct Document Skew.
Contents Skew when using Correct Document Skew.
Paper Skew is not applied even if this is selected. When you select Paper and Contents Skew,
only skewing of the contents is corrected.
Black. This may reduce offset in the background.
81