Connect To Your Tv; Using Your Television Antenna; For Vhf/Fm Reception; For Uhf Reception - Philips SDV2710/27 User Manual

3.2 Connect to your TV
Open the antenna and connect one end of
1
the coaxial cable to signal output of the
antenna and the other end to the input on
your TV receiver.
Open the supporting plate on the back of
2
the antenna (maximum angle of opening
is 120 degrees) in order to make the
antenna stand straight.
4 Using your indoor
television antenna
4.1 For VHF/FM reception
Extend the telescoping dipoles to the
1
longest possible length.
Turn your TV or FM radio to the desired
2
channel/station. Adjust the dipoles by
moving in different directions up and down,
until reception is achieved.
4.2 For UHF reception
Turn your TV to the desired channel.
1
Point the UHF reflector towards the
2
transmitter until reception is achieved.
D Note
For best results you should point your antenna
in the direction of the transmitter.
1
2
3
4
5
1
TV
ANT.
2
3
4
-or-
5