Connect To Your Tv; Using Your Television Antenna; For Vhf Reception; For Uhf Reception - Philips SDV2730/27 User Manual

3.2 Connect to your TV
Connect one end of the coaxial cable to
1
signal output of the antenna and the other
end to the input on your TV receiver.
Connect DC plug to the antenna and the
2
power supply to a 120V AC outlet.
4 Using your indoor
television antenna
4.1 For VHF reception
Extend the telescoping dipoles to the
1
longest possible length.
Turn your TV to the desired channel. Adjust
2
the dipoles by moving in different directions
up and down, until reception is achieved.
Turn on the amplifier by rotating the gain
3
control knob towards the max position until
better reception is achieved.
Note
D
You may need to turn the gain control down to
a lower setting for best reception.
4.2 For UHF reception
Turn your TV to the desired channel.
1
Position antenna toward transmitter until
2
reception is achieved.
Turn on the amplifier by rotating the gain
3
control knob towards the max position until
reception is improved.
Note
D
You may need to turn the gain control down to
a lower setting for best reception.
E Tip
This antenna can be placed on a vertical
and horizontal orientation to extend
B
reception choices.
4
2730_27.indb 4
1
2
3
4
A
5
OUTPUT
3
MAX.
MAX. MIN.
6V 100mA OUTPUT
TV
ANT.
6V 100mA
MIN.
-or-
A
5/6/08 3:56:55 PM
1
2
3
4
5
B