Table of Contents
Advertisement
Available languages
Available languages
Parts Included
EN
Mounting Instructions
Screw Holes
Screw Holes
Wall Mount
20
1.
SDV2940 Antenna
2.
Power supply
3.
Wall / Mast Bracket
4.
Nuts
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
5.
U-Bolts
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
6.
Mast clamps
7.
Nuts with lock washers
8.
L-Bracket
9.
2" Wood Screws
10.
20' coax cable with connectors
11.
Weather Boot
12.
Power Injector
13.
Plastic Anchors
Determining signal strength
Before Installation determine the best location for optimum
reception. It is important for the antenna to have an unobstructed
path to the transmitter. For best results the antenna should be
facing the transmitter location.
For indoor wall mount installation:
NOTE: Do all antenna assembly work on the ground before
installing on a wall or an antenna mast.
1.
Attach main body to the L – bracket as shown, using cross head
screw note the orientation of the bracket. Do not fully tighten
the screw to allow for later adjustment (fig. 1).
fig.1
2.
Using the Wall/Mast bracket as a guide, mark position for the
four 2" wood screws. If possible locate a stud to screw into.
If a stud is not available, use appropriate wall anchors (not
included, available at any hardware store) (fig. 2).
fig.2
. . . . . . . . . . . . . . . . . . . . . . . . . .1
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
. . . . . . . . . . . . . . . . . . . . . . . . .1
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
. . . . . . . . . . . . . . . . . . . . .4
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
. . . . . . . . . . . . . . . . . . . . . . . . . . .4
. . . . . . . . . . . . . . .1
. . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
. . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
. . . . . . . . . . . . . . . . . . . . . . . . . . . .4
Advertisement
Chapters
Table of Contents
