MTD 110 Owner's Manual

GRASS CATCHER
PARTS LIST FOR MODEL 110 GRASS CATCHER
REF. PART
CODE
NO. NO.
1 16839B
2 747-0575
3 749-0774
4 764-0271
5 710-0599
6 736-0270
8 747-0870 N
9 710-0751
10 736-0329
11 712-3006
*For faster service obtain standard nuts, bolts and washers locally.
If these items cannot be obtained locally, order by part number
and size as shown on parts list.
HELPFUL OPERATING HINTS
When using the grass catcher, keep the engine
throttle in the "FAST" position so grass discharges
from the chute properly and completely fills the bag.
Always clean the grass catcher bag after use. Grass
remaining in the bag will cause mildew.
If any part of the grass catcher rubs against the
wheels, bend the catcher frame slightly to prevent
wear on the bag.
WARNING: Always stop the engine
before removing the grass catcher. Do
not restart the engine until the grass
catcher has been put back on the mower
in its proper place. Do not make any
adjustment to the grass catcher assem-
bly while the blade is revolving.
PRINTED IN U.S.A.
DESCRIPTION
Frame—Lower Ass'y.
Frame—Upper
Tube Support
Grass Bag
Hex Wash. Hd. TT-Tap
Scr. 1/4-20 x 5" Lg.
Bell-Wash. 1/4" I.D.
Grass Bag Hook
Hex Bolt 1/4-20 x .62" Lg.*
L-Wash. 1/4" I.D.*
Hex Nut 1/4-20 Thd.*
Model Number
190-110-000
NOTE: Under normal usage bag material is subject to
wear and should be checked periodically. Be sure any
replacement bag complies with the mower manufac-
turer's recommendations. For replacement bags, use
only factory authorized replacement bag No. 764-
0271.
NOTE: Specifications subject to change without
notice or obligation.
FORM NO. 770-8358K