Dial And Buttons - AEG L6FBK841N User Manual

B
C
D
E

7. DIAL AND BUTTONS

7.1 Programme dial
For selecting the desired washing
programme. Refer to 'Programmes'
chapter for more details.
The position
which stops and resets the running
programme. When the selector is in this
position, display shows
that no programme was selected.
7.2 On/Off
Pressing this button for a few seconds
allows to activate or deactivate the
appliance. Two different tunes sound
while switching the appliance on or off.
As the Stand-by function automatically
deactivates the appliance to decrease
the energy consumption in a few cases,
you may need to activate the appliance
again.
For more details, refer to Stand-by
paragraph in Daily Use chapter.
Extra rinse indicator. It lights on when this option is se-
lected .
The
tions.
Child safety lock indicator.
Door locked indicator.
is a "Reset" function,
. It indicates
indicator blink during the laundry load detec-
7.3 Introduction
The options/functions are
not selectable with all
washing programmes. Check
the compatibility between
options/functions and
washing programmes in the
"Programme Chart". An
option/function can exclude
another one, in this case the
appliance doesn't allow you
to set the incompatible
options/functions together.
Make sure the screen and
touch buttons are always
clean and dry.
7.4 Temperature
When you select a washing programme,
the appliance automatically proposes a
default temperature.
Set this option to change the default
temperature.
The indicator
temperature comes on (the appliance
does not heat the water).
7.5 Spin
When you set a programme, the
appliance automatically sets the
maximum spin speed allowed.
Touch repeatedly this button to:
Decrease the spin speed
Activate the Rinse Hold option
ENGLISH
= cold water of the set
13