Connecting Drain Hose - LG WTL-8KG10 Owner's Manual

C
onnecting Drain Hose
Before connecting Drain Hose, check your Drain Hose model and choose the correct
instructions.
Pump Model
1
Push the end part of the drain hose in the
outlet of the drain pump and tighten with
the clamp to fit in.
2
Put the other end of the drain hose over the
standpipe or wash tub.
CAUTION
• The discharge height should be approximately 0.9~1.2m from the floor.
• To prevent siphoning, the drain hose should not be extended more
than 50mm from the end of the hose guide.
Non-Pump Model
1
2
3
Product feature may vary according to different models. Refer page 38 for modelwise
*
features for your purchased model.
*
Within 50mm
30
Hose
Guide
0.9~1.2m