Dss/One-Touch Keys - NEC SL2100 User Manual

SL2100 DT920 (ITK-8LCX) User Guide
3.4.2

DSS/One-Touch Keys

Programmable Function Keys can be assigned as DSS (Direct Station
Selection) or One-Touch Keys. You can place an Outside / Intercom Call by
just pressing this key without dialing the number.
Figure 9 DSS/One-Touch Keys
To change the Trunk Access Code, Ask your NEC Authorized

Supplier for the details.
In the default setting, Programmable Function Key No. 1 to 12 is

assigned as "Trunk" Key. If you want to assign DSS Keys at the
unused Trunk Keys, these unused keys should be erased by 752 +
000 operation before the above operation.
In case of DSS Key, the extension status can be indicated on the BLF.

(idle : extinguished, Busy : lit).
When you register a telephone number, the Trunk Access Code

should be added in front of the number.
Up to 36 digits dialing can be registered, but the name can not be

registered.
If you want to continue the operation, press Programmable Function

Key instead of Speaker Key to finish.
One-Touch Keys can be assigned by Soft Key operation as well.

Issue 1.0
13