Summary of Contents for Harbor Freight Tools Jack and Jill Bench 91489
Page 1
. All rights reserved. No portion of this manual or any artwork contained herein may be reproduced in any shape or form without the express written consent of Harbor Freight Tools. For technical questions and replacement parts, please call 1-800-444-3353...
Page 2
Specifications l a r i s n L " H " " 2 / : t h x " " 8 / : t h " 8 / r i a i s n " 6 : t s L " "...
Page 3
Unpacking When unpacking, check to make sure all parts are included. See parts list on page 5. If any parts are missing or broken, please call Harbor Freight Tools at the number on the cover of this manual. Assembly and Operation Find a level, dry area to assemble this item, where you will not be interrupted.
Assembly and Operation (cont’d) Attach each Seat (10) and (11) to its Seat Back (12) using m8 x 30 Bolts (1) as discussed on the previous page. Do not completely tighten bolts until assembly of the entire unit is finished. Attach the Arm Rests (14) and (15) to the seat assemblies you have completed in step 1, using four m8 x 60 Bolts (3) through the Arm Rest legs and Seat, and two m8x60 Bolts (3) through the arms and Seat Back (12).
WARNING: Only use this bench on a flat, level and solid surface. Maintenance Do not expose this bench to prolonged sunlight or rain. Protect from exposure to freezing rain or snow. When not in use, store in a shed or other location to protect it from the weather.