Philips CT1638/000000EU User Manual page 8

1. Once the battery is in place and the battery cover
clipped on the phone, plug the connector of the
charger (supplied with the phone, in the box)
into the socket at the base of the phone on one
end, then plug it into a main AC power socket
with easy access to the other end.
3
2. The battery symbol indicates the state of charge:
- During charging the 4 charge indicators scroll;
it takes around 2.30 hours to fully recharge
your mobile phone.
- When all 4 bars are steady the battery is fully
charged and you can disconnect the charger.
Depending on the network and condition of
use, talk time goes from 2 to 7 hours and
standby time from 200 to 680 hours.
Keeping the charger plugged into the mobile when the
battery is fully charged doesn't damage the battery.
The only way to turn off the charger is to unplug it, so
use an easily accessible AC power socket. You can
connect the charger to an IT supply (Belgium only).
Getting started