Applications; Calculator; Alarm Clock - Philips CT1898/000000EU User Manual

Philips xenium ct1898 9@9a
Table of Contents

Advertisement

11. Applications

Calculator

Your phone has a built-in calculator that you can use
to perform basic calculations. Numbers are entered
with the keypad and operators with the navigation
keys as indicated in the table below:
Addition
Press
Subtraction
Press
Multiplication
Press
Division
Press
Equals
Press
This icon appears at the top right of the
screen and indicates which navigation key to
use for entering operators.
This icon appears at the top left of the screen
to indicate that pressing
effect as pressing "=" on a calculator.
0
Press and hold
key to get the decimal point.
Calculator accuracy is to 2 decimal places and is
rounded up to the higher decimal figure.
42
>
*
or the
key once.
<
*
or the
key twice.
+
*
or the
key 3 times.
-
*
or the
key 4 times.
,
#
key or the
key.
,
has the same

Alarm clock

Your mobile phone has a built-in alarm clock with a
snooze feature. You can set up to three separate alarms
and choose whether or not the alarm should repeat.
To set an alarm, follow the steps below:
1. Select an alarm and set it On.
2. Then enter the time and press the
3. Then select the frequency: Once, Daily,
weekdays.
4. Finally, select the type of alarm: the
Melody
from the sounds album and press the
key.
Repeat above steps to set other alarms.
The alarm clock will ring even if your mobile phone is
switched off and/or the ringer volume is set to Silent.
When the alarm rings, press any key to stop it (except
if the snooze mode is on, see below).
Snooze mode
This menu allows you to set the snooze mode
Off. When the alarm rings and the snooze mode is On:
• press any key (except Stop) to stop the ringing
temporarily. The alarm will ring again around 7
minutes later.
Stop
• press
to stop the ringing and the alarm
repetition.
,
key.
On
Buzzer
or a
,
On
or
Applications

Advertisement

Table of Contents
loading

Table of Contents