Handset; Babysit Mode; Registration - Philips DECT5154S/07 User Manual

Babysit mode

This feature allows you to monitor the baby's room. Place the handset in the room to be monitored
and you will hear the noise coming from the room on the additional handset.
To activate/deactivate the babysit mode
Press to enter the carousel menu
Scroll to Handset and select
Press to select Babysit mode
Select ON or scroll
An intercom is necessary to monitor the room (see page 38).
Note: during an intercom, you can still answer a call or make a call with the handset

Registration

Up to 6 handsets can be registered to the base station. 1 handset can be registered to 4 base stations.
Warning: If you wish to associate non Philips handsets to the DECT 511 or DECT 515 base
station, make sure that this handset is GAP compliant otherwise it will not operate properly (see p 13).
To register a handset
Unplug and plug back in the mains lead to put the base in registration mode
With the additional handset, press
Enter the 4-digit RC code written on the sticker
placed under the base station and press
To unregister a handset
Press to enter the carousel menu
Scroll to Handset and select
Scroll to Registration and select
Scroll to Un-register handset and select
Choose the handset to un-register from the list and press
Enter the 4-digit RC code and press
Note: should you have your handset serviced alone, please make sure it is unregistered from the base
station before taking it back to the repair centre.
28
http://www.philips.com/faqs/dect

Handset

Babysit mode
Registration
Rename handset
Date & time
Display contrast
Backlight
Screen saver
if there are at least 2 handsets
to OFF and select
to start the registration
OK
OK
Handset
OK