There are messages on your voice mailbox. Batteries charge status : full or low. * subject to subscription to the Caller Display service. Note: The call duration appears on the display at the end of the call. Handset display http://www.philips.com/faqs/dect...
Hereby, Philips, declares that this DECT 111 is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC Philips has marked the battery and packaging with standard symbols designed to promote the recycling and appropriate disposal of your eventual waste.
Leave a little space (3 mm) between the screw head and the wall. You can now hang the base station on the screws and connect the power supply and line cord. , One DECT 111 handset , one warranty leaflet http://www.philips.com/faqs/dect 3 mm...
Page 5
NiMH. Optimal battery life is reached after 3 cycles of full charge / discharge. Standby time : around 100 hours Talk time : around 10 hours Put the handset on the base and charge for 24 hours. http://www.philips.com/faqs/dect...
Numerical keypad Earpiece Call log key Redial key Programming key Microphone Paging key The paging key enables to locate a missing handset. Press the key until the handset starts to ring. Once retrieve, press the call key on the handset. http://www.philips.com/faqs/dect...
Programming key.To start & end a setting. Flash programming. - Long press to make an internal call (DECT 111 Duo). Dial # - Long press to activate/deactivate the keypad lock. Dial * - Long press to activate/deactivate the ring tone. http://www.philips.com/faqs/dect DECT 111 keys...
The other handset rings. Answer the call on the called handset. Predialling Dial the phone number. Press the Correction key to delete incorrect digits. Press the Talk key. Note:With your DECT 111 you can dial up to 18 digits. http://www.philips.com/faqs/dect...
Press the Talk key to make the call. Press the Correction key to exit without dialling To delete all the numbers at once Press the Programming key. Press 0 Press the Phonebook key. Press the Programming key to confirm. http://www.philips.com/faqs/dect...
Use the key to scroll through the list of unanswered calls. Press the Correction key to exit the call log. A long press erase the current entry and the next is shown on the display. Note: the oldest entry is deleted when the memeory is full. http://www.philips.com/faqs/dect...
Enter your 4-digit PIN code (default is 0000). Press the Programming key. Enter the phone number (of your network voice mailbox). Press the Programming key to save the number. From now press key 1 to listen to the messages on your network voice mailbox. http://www.philips.com/faqs/dect...
Enter your 4-digit PIN code. Press the Programming key. A saved number is displayed. Delete it with the Correction key. Enter the number you want to be the direct baby call number. Press the Programming key to save the number. http://www.philips.com/faqs/dect...
You can choose from 3 earpiece volume levels. Press the Programming key. Press 4. The current setting is displayed (1/3 for example). Enter your choice of volume 1(low), 2(medium) or 3 (high). Press the Programming key to save the setting. http://www.philips.com/faqs/dect...
DTMF tone dialling capability or using old PABX) To restore the default settings This procedure allows to reset the phone to default settings. Press the Programming key. Press 9. Enter your 4-digit PIN code. Press the Programming key to save the setting. http://www.philips.com/faqs/dect...
To activate/deactivate the keypad lock Long press on # key to activate the keypad lock. The display shows Long press on # key to unlock the keypad. Note:When the keypad is locked you cannot make calls but you can still answer a call. http://www.philips.com/faqs/dect...
- Take the handset off the base station and put it back again. - Clean them with a clean and dry cloth. Please contact your PHILIPS dealer in order to purchase new rechargeable battery pack. Make sure your product is plugged in.