Registering A Handset; Selecting A Base - Philips CD2301S/73 User Manual

To turn off Baby call,
1. Press .
2. Select OFF and press OK.

Registering a handset

Each base can register up to 4 handsets. Each handset can register up to 4 bases.
If you have inadvertently unregistered your handset, you can register it again. Additional handsets must be
registered to the base before use.
Note : If you wish to register non Philips handsets to a CD 230 base station, make sure that this handset
is GAP compliant otherwise it will not operate properly (see page 9).
1. Press .
If your handset displays UNREGISTERED, go to step 5.
2. Select ADVANCED SET and press OK.
3. Select REGISTRATION and press OK.
4. Before you enter the PIN, long press the PAGING key
in the registration mode.
Note : If the base is full and cannot take on any more handset, you will not be able to register. See the
section "Un-registering a handset", page 26 to un-register a handset.
5. Enter the Base PIN (by default 0000) and press OK.
6. Select a base using the digit keys. A blinking digit indicates that the base number is already used.
The handset name, the handset number, and the clock will be displayed.
If the registration is not successful,
- the handset registers back to its original base unit, or
- SEARCHING is displayed if it has lost link with its original base, or
- UNREGISTERED is displayed if it is registering for the first time.
Follow the procedure and try again.

Selecting a base

If your handset is registered to more than 1 base, you can select which base the handset will use. You can
choose a fixed base or you can allow the handset to automatically search for a nearby available base (Auto
Base).
1. Press .
2. Select ADVANCED SET and press OK.
3. Select BASE SELECT and press OK. The current setting is displayed.
4. Select the base you want your handset to use and press OK.
Advanced features
on the base for 4 seconds. The base is now
EN
25