Important; Power Requirements - Philips XL6601C/38 User Manual

1

Important

This product is not designed for making
emergency telephone calls when the
power fails. Alternative arrangements
should be made for access to emergency
services.
1.1

Power requirements

• This product requires an electrical
supply of 100-240 volts, single-
phase alternating current, excluding
IT installations defined in standard
AS/NZS 60950.1.
• The electrical network is classified as
dangerous according to criteria in the
standard AS/NZS 60950.1. The only
way to power down this product is by
unplugging the power supply from the
electrical outlet. Ensure the electrical
outlet is located close to the apparatus
and is always easily accessible.
• The voltage on the network is classified
as TNV-3 (Telecommunication
Network Voltages, as defined in the
standard AS/NZS 60950.1). Following
a power cut, the call in progress, as well
as the date and time settings will be lost.
!
Warning
• Do not allow the handset to come into
contact with liquids or moisture.
• Do not open the handset, base station
or charger. This could expose you to
high voltages.
• Do not allow the charging contacts or
the battery to come into contact with
conductive materials.
• There is a slight chance that your
product could be damaged by an
4
electrical storm. We recommend that
you unplug the product from the
power supply and telephone socket
during a storm.
• Do not use the handset in an explosive
hazard area such as where there is gas
leaking.
• It is recommended that this product is
not used near intensive care medical
equipment or by persons with
pacemakers.
• This product can interfere with
electrical equipment such as answering
machines, television, radio, and
computers if placed too close. We
recommend that you position the base
station at least one meter from such
appliances.
• Use only the mains adapter supplied
with this equipment. Incorrect adapter
polarity or voltage can seriously
damage the unit.
Base adapter:
Philips S005CS0500050
Input: 100-240VAC/150mA, 50/60 Hz
Output: 5 VDC, 500mA
Charger adapter:
Philips S002CS0500021
Input: 100-240VAC/100mA, 50/60 Hz
Output: 5 VDC, 210mA
• CAUTION: RISK OF EXPLOSION IF
BATTERY IS REPLACED BY AN
INCORRECT TYPE. Use only with
Philips, type no.: Multi-Life 600mAh
(2x 1.2V AAA 600mAh Ni-MH)
rechargeable battery. Use only the
recommended type supplied with this
product. Dispose of used batteries
according to the instructions.
Important